Installation: Indoor, Outdoor
Suitable for combustible dust: No (customizable if required)
Function: Used as an online system for collecting high volume process-generated dust or impurities from the source point on a continuous basis to enhance the air quality.
The DJS series fume and dust collector is a compact, fully assembled and prewired solution for the metal cutting industry. Integrated with laser and plasma cutting machines, it captures fume and particulates at the source, reducing worker exposure and protecting the machinery.
Also available: DJS550 (5.5 kW, 4000 to 5700 m3/h) and explosion-proof DJS550E / DJS750E.
Features:
- Centrifugal fan that works continuously 24 hours a day with large air volume, low noise and stable performance
- Modular design with a small footprint
- Schneider electric components with phase sequence, overheating and overload protection
- 15 PTFE-membrane HEPA cartridge filters with large filter surface and excellent efficiency
- Automatic filter cleaning with adjustable pulse time interval
- Two operation modes, Local and Remote; remote linkage starts and stops the unit with other machines
- Airflow management: inlet with velocity reducer and internal air duct for lower filter loading
Application: Laser cutting, plasma cutting, robot welding stations and thermal cutting fume.
Specification:
| Model | DJS750 |
|---|---|
| Current type (Ph-V-Hz) | 3 – 380 – 50/60 |
| Power (kW / HP) | 7.5 / 10 |
| Sound pressure level (dB(A)) | 74 |
| Filter efficiency (um) | 0.1-0.3 |
| Filter type | 15 HEPA filters |
| Filter cleaning system | Automatic pulse jet (compressed air 4-6 bar) |
| Explosion-proof configuration | No (customizable) |
| Switch control mode | Local + Remote |
| Dimensions L x W x H (mm) | 1280 x 1200 x 2600 |
| Airflow (m3/h / CFM) | 5000-7000 / 2943-4120 |
| Vacuum (kPa / inH2O) | 2.5-3.3 / 10-13.3 |
| Container capacity (l / gal) | 50 / 13.2 |
| Filter area (m2 / ft2) | 72 / 775 |
| Inlet diameter (mm / in) | 150 / 500 (5.9 / 19.7) |
| Cable length (m / ft) | 8 / 26.2 |